Home > News Center > Content

Introduction to the advantages of the overall shower room

Integral shower roomThe glass used is usually tempered glass processed by physical methods. The glass is heated to a certain temperature and then cooled suddenly. The tempered glass changes the crystal structure of the glass part, improves the surface hardness, and the impact resistance of the glass , The bending strength is more than ten times higher than ordinary glass.

Tempered glass will have a certain spontaneous explosion rate, but this can be prevented and reduced, as long as you pay attention to the following: ensure the smooth running of the pulley track, add some lubricating oil or peanut oil when the sliding is not smooth; when the pulley of the track shower room is in When it is loose or falling off, seek maintenance personnel to adjust in time to ensure the effective load of the pulley on the sliding door, and then use a paper towel to moisten peanut oil to clean the foreign objects in the track to ensure smooth sliding; avoid strong impact on the movable door to prevent the sliding door from falling off; do not use Sharp and hard objects hit the glass, especially the four sides and corners.

Integral shower room is a non-steam generating device, a sanitary unit composed of a spray device, shower room body, shower screen, top cover, bottom basin or bathtub. The basic structure of the shower room is a chassis and a fence. The chassis is mostly made of diamond, acrylic, fiberglass, etc. Different sizes. The luxurious spray room is controlled by a computer, with surfing, back massage, steam, waterfall faucet, bath mirror, etc., as well as lighting, music and other functions, which are expensive.

1. Science and technology first, enjoy green and environmental protection comfortably:

No formaldehyde or any other gas, no radioactive elements of ceramic tiles, no radiation pollution, just install and live

2. Durable:

Durable: SMC has a aging life of more than 30 years, which can ensure the service life of the integrated bathroom for at least 20 years, which greatly exceeds the decoration cycle of ordinary households

Sturdy: After the SMC is subjected to high temperature and high pressure, the molecular structure becomes extremely compact, the material has no micropores, and the pressure capacity is strong

Stability: SMC is acid and alkali resistant, high temperature resistant, no deformation or discoloration after 100 hours of testing in a water bath at 80℃

3. Do not leak

The integrated toilet waterproof plate is molded in one time, and the unique flanging locks the water design, which will never leak, eliminating the shortcomings of running, dripping, and leaking in the traditional bathroom

4. Safety insulation

SMC material has good insulation, no conductivity, safe and reliable use

5. Low carbon and energy saving

There is a thermal insulation buffer layer between the integrated toilet and the wall to prevent heat from being absorbed by the building. With the thermal insulation performance of the SMC material itself, even in the northern winter, there is no need to install a radiator or a bath heater

6. Turning zero into a trinity Mu-Lin integrated toilet, using aerospace material-SMC as the main frame raw material, integrated design and standardized production by precision numerical control equipment, is an organic integration of the three functions of bathing, washing, toileting and water supply system, The overall solution of drainage system, circuit system and other supporting facilities.