400-988-0023

Banner
Home > Industry knowledge > Content

Introduction to the manufacturing process of prefabricated toilets

The technical problem to be solved by the utility model is to provide an improved prefabricated toilet.

The technical solution adopted by the utility model to solve its technical problems is: constructing a prefabricated toilet, including a caisson and a wall surrounding the upper side of the caisson;

The walls of the wall body in different directions are integrally connected, and the wall body and the caisson are integrally connected;

A drain pipe is laid in the caisson, and the water outlet end of the drain pipe penetrates the wall;

The caisson and/or the wall are provided with a connection structure for detachable connection with floor panels and beams.

Preferably, the caisson includes a box body and a backfill layer arranged inside the box body, and the box body is integrally connected with the wall body.

Preferably, the inner surface of the box body is provided with a waterproof layer, and the backfill layer is provided on the waterproof layer.

Preferably, a waterproof material is painted to form the waterproof layer.

Preferably, the backfill layer includes ceramsite concrete or aerated mortar.

Preferably, the drainage pipe is arranged in the backfill layer, and the drainage pipe includes a sewage drainage pipe, a floor drain drainage pipe, a water drainage pipe and a toilet drainage pipe.

Preferably, the inner side of the wall is provided with a water inlet, and the wall and the backfill layer are also provided with a water supply pipe communicating with the water inlet.

Preferably, the upper surface of the caisson is lower than the floor surface of the corresponding floor.

Preferably, a circuit pipeline is embedded in the wall body.

Preferably, the top of the prefabricated toilet is an open structure.

Implementing the prefabricated toilet of the utility model has the following beneficial effects: the prefabricated toilet has a simple structure, simple and convenient production, and can be replicated industrialized standardized production. The obtained prefabricated toilet can be directly transported to the site for installation when used, which can save a lot of money Manpower and material resources are used to realize the green building concept of energy saving and environmental protection, and the overall performance of the prefabricated bathroom is good, with light weight and high strength characteristics, which can reduce the load of the entire building.

The prefabricated toilet is an independent non-stressed component. The four walls adopt thinner non-structural wall panels, and do not need to extend steel bars to the floor and cast-in-place walls. The whole toilet is fixed with dry connection for easy installation.